4-electrode Conductivity (cell outside)
- Product Name: 4-electrode Conductivity (cell outside)
- Product brand：FLUIDINGS
Fluidings conductivity sensor measures conductivity by AC voltage applied to 316 or C22 electrodes. The sensor requires little maintenance or special attention for storage and can measure high conductivity water long-term .
Features of 4-electrode Conductivity (cell outside)
- Exposed 4-electrode with 316 or C22 conductivity cell, calibration parameters are stored in the sensor.
- mV class AC drive, better polarization resistance, smaller drift.
- RS485 output, Modbus protocol.
- Titanium shell, suitable for a variety of complex applications
- IP68 connector.
- Exposed structure, easy to clean.
- Output water temperature, conductivity and salinity, TDS
simultaneous
| Measurement Method | 4-electrodes AC drive |
| Range | 1uS/cm~100mS/cm |
| Resolution | 1uS/cm |
| Accuracy | ±3% reading or ±0.2mS/cm w.i.g** |
| Operating temperature | 5~45℃ |
| Storage Temperature | -10~50℃ |
| Min. Detection Limit | 0.3uS/cm |
| Warranty | 1 year |
| Depth | IP68 |
| Power | DC5V 5% |
| Output | RS485，Modbus RTU |
| Materials | Titanium, 316 or C22, PEEK |
| Dimensions | Length 143mm(connector not included), diameter 16mm |
| Flow rate | < 3 m/s |
| Response time | 10s T90 |
| Field life* | 2 years or greater |
| Recommended Calibration maintain Frequency * | 3 months |
Product Enquiry
Application Areas
Safety
Environmental Protection
Oil
Chemical
Pharmaceutical
Metallurgy
Coal Chemical Industry
Storage
Fluidings
